Myles Group Brochure
Manufacturing
Testing Services
Hydraulic Repair
Electronic Repair
Design Development
Literature

310 Executive Dr.
Troy, MI 48083
(248) 583-1020
Fax: (248) 583-9496
E-mail: sales@
jem-cp-r.com

General
Test Machines for:

• Custom Systems & Equipment

 • Fuel Pumps • Hydraulic Vibration

• Air Amplifier

 • Hose Burst • Seats & Chairs

• Filtering Cart

• Hydraulic Accessories

• Hydraulic Power Supplies • Hydraulic Flushing
• Blow Molding Parison Controller Upgrade • Hydraulic Flushing, Dynamic and Static  

HYDRAULIC FLUSHING, DYNAMIC & STATIC
TEST MACHINES

 Models HFT 30 and HFT 45 have been designed to perform hydraulic flushing, dynamic and static testing of a vehicle or machine where "clean oil" is required to operate the equipment and where an independent source of hydraulic power is required to dynamically and statically test to a predetermined specification. These HFT machines are designed to clean hydraulic oil to MIL-STD 1246A cleanliness level 200, ISO cleanliness 14/11, NAS 16385 and SAE class level II. The HFT 30 provides 30 gpm flow and the HFT 45, 45 gpm flow.
Both machines are portable and designed to be moved to their respective work locations. They can provide substantial savings to the user by providing clean oil to the vehicle or machine for which it was intended. Close tolerance pumps, valves (as well as servo valves), and other critical components can be protected from the usual "start up" problems experienced with hydraulic systems. The HFT 30 and HFT 45 machines will improve productivity and will be cost effective in the areas of application described above.

HFT 30

  1. 40 HP, 1200 RPM "C" face motor drive.
  2. 5000 PSI continuous rated pump at 30 GPM output.
  3. Three pressure selector system with illuminated push buttons providing loaw, medium and hgh pressure adjustment. Adjustable low and medium to 2100 PSI full flow, and high pressure to 3000 PSI at 20 GPM. A gradual pressure increase/decay package is featured in this control where pressure is increased or decreased at a rate of approximately 500 PSI per second.
  4. 80 gallon stainles steel closed reservoir with a 5 gallon Kleenvent and pressure/vacuum safety valve with 3 micron filtration.
  5. 3 micron pressure and return line filters with dirty element warning lights.
  6. A 6 GPM recirculating pump with a 3 micron filter with dirty element warning lights, ball valves and disconnects for external reservoir flushing or fill.
  7. Air cooled heat exchanger.
  8. Standard pluming features include face seal type tube fittings.
  9. Each machine is enclosed with removable panels and padded internally with 1 1/4" polyurethane foam sheet for sound abatement.
  10. Outgoing and incoming oil sample spouts with shut-off valves.
  11. A system temperature indicator with adjustable over temperature shutdown.
  12. Low oil shutdown feature.
  13. Supply on/off push button.
  14. An optional contamination level counter available to classify and record in ISO grades and provide viscosity.
 
HFT 45
  1. 60 HP at 1800 RPM with "C" face motor drive.
  2. 5000 PSI continuous rated pump with a 45 GPM output.
  3. Other features same as HFT 30.